Skip to content
DIVASby Movilift

Two drives, one DIVAS.

DIVAS comes with a gearless MRL drive or a hydraulic drive with the piston under the cabin. Both are built to EN 81-41 and the Machinery Directive, both are made to measure.

DIVAS technical data
DIVAS MRLDIVAS Hydraulic
DriveGearless permanent-magnet motorPiston under the cabin, power unit at the bottom of the shaft
Rated load250–400 kg250–650 kg
Speed0.15 m/s (up to 0.30 m/s)0.15 m/s (up to 0.30 m/s)
Stopsup to 7up to 7
Travelup to 25 mup to 25 m
Pitfrom 150 mmfrom 150 mm
Headroomfrom 2400 mmfrom 2400 mm
Power supply230 V single-phase / 400 V three-phase230 V single-phase / 400 V three-phase
Motor power0.6 – 1.2 kW1.5 – 4 kW
DoorsSwing or automaticSwing or automatic
StandardsEN 81-41 · 2006/42/ECEN 81-41 · 2006/42/EC

Minimum values: they depend on the floor and ceiling finish you choose.

Which one is right for you?

Choose MRL if…

  • you want the lowest running and maintenance costs
  • the lift is outdoors or in a cold climate
  • you prefer an oil-free system

Choose hydraulic if…

  • you need a higher rated load, up to 650 kg
  • the climate is temperate
  • you want the lowest purchase price

How much space does DIVAS need?

Every DIVAS is built to the measurements of your house. These are the starting points we use.

  • 90 × 120cm

    Wheelchair access

    Cabin for a wheelchair user, with a handrail.

  • 140 × 160cm

    Comfort

    A generous cabin for two or three people, or a wheelchair and a companion side by side.

Minimum values: they depend on the floor and ceiling finish you choose.

Section of the shaft: Pit ≥ 150 mm, Headroom ≥ 2400 mm. Indicative diagram, not to scale
COP: car operating panel, inside the cabin. LOP: landing call panel, at every floor.

Send us your measurements.

Floors, ceiling heights and the space you have: our technical office checks them and sends you a drawing.

Request a quote